The installation method and application scenario of beryllium copper reed:

1. Slotted installation
One of the common mounting methods for beryllium copper reeds is slotted mounting.
Make the holes in the panel that are required to install the product. The groove length is determined by the length of the beryllium copper reed.
Buckle slots and edge-mounted symmetrical fingers use one or two fingers, which makes applications such as sliding drawers, doors, mounting bracket assemblies and lids more economical.
They can be applied bidirectionally and the snap property makes beryllium copper reeds easy to install.
The main beryllium copper reeds installed in the grooved installation are: EMS-77-010/EMS-78-010/EMIS-H06/EMS-77-011/EMS-77-021/EMS-77-023, etc.
The main application scenarios are: chassis panels, covers, handles, etc. in communications, chassis cabinets and other industries.
2. Tape pasting: this method has a good pasting effect, which requires a certain amount of pressure, and is an ideal choice for metal shell and electronic shell shielding strip;
Most common: EMS-77-012/EMS-77-014/EMS-77-033/EMS-77-078/EMS-77-082 (for MRI gates)
EMS-97-500/EMS-97-520/EMS-97-537/EMS-97-538/EMS-97-540 (Multifunctional series reeds, can be glued, welded, etc.)